Steam traps Thermodynamic
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P150-11 CMGT Issue 6
Description The TD120M is a maintainable high pressure thermodynamic steam trap with integral strainer and a replaceable seat to ease maintenance, which can be supplied in ½", ¾" and 1" sizes with socket weld, butt weld or flanged connections. It has low capacity specifically designed for superheated mains drainage applications up to 250 bar g (3626 psi g). Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU. Certification This product is available with certification to EN 10204 3.1. Note : All certification/inspection requirements must be stated at the time of order placement. TD120M High Pressure Thermodynamic Steam Trap with Replaceable Seat
5.7.66
8.7 99
Sizes and pipe connections ½", ¾" and 1" Butt weld ends to suit Schedule 160 pipe.
½", ¾" and 1" Socket weld ends to ASME (ANSI) B 16.11 Class 6000. DN15 and DN25 standard integral flange EN 1092 PN160 and PN250. DN15, DN20 and DN25 standard integral flanges: EN 1092 PN100, ASME (ANSI) Class 600, 900 and 1500.
TI-P150-11 CMGT Issue 6
Page 1 of 6
TD120M High Pressure Thermodynamic Steam Trap with Replaceable Seat
Powered by FlippingBook