Steam traps Swivel connectors and traps
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2026
TI-P806-01 CMGT Issue 3
PC90 4-Bolt Pipeline Connector
Description The 4-Bolt PC90 pipeline connector is designed for the quick fitment of replacement steam traps without the need to break into the steam pipeline itself, reducing system downtime. The PC90 is designed to ASME Class 900 with all stainless steel construction specifically for use with the UTDS90 and USM90 steam traps. The PC90 is available in both Left to Right and Right to Left flow configurations and with or without a strainer blowdown connection. Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU and is considered SEP. This product has been designed in line with the following standards: ASME B31.3 and B16.34 Class 900 (body design conditions). Certification This product is supplied with EN 10204 3.1 certification as standard. Note : All certification/inspection requirements must be stated at the time of order placement. Canadian Registration (CRN) for the PC90 is pending.
Sizes and pipe connections Condensate inlet/outlet Size
ASME B16.11 Class 3000 Socket Weld
Butt Weld
Flanged ASME Class 600
Flanged ASME Class 900
½" (DN15)
Y
Y
Y
¾" (DN20)
Y
Y
Y
Y
1" (DN25)
Y
Y
Y
Y
8.9 13
The PC90 has been designed for use with the following steam trap options:- UTDS90 and USM90.
PC90 Pipeline Connector
Steam trap type to be specified e.g UTDS90 or USM90
TI-P806-01 CMGT Issue 3
Page 1 of 7
PC90 4-Bolt Pipeline Connector
Powered by FlippingBook