Steam traps Swivel connectors and traps
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2026
TI-P804-01 CMGT Issue 3
UTDS90 Stainless Steel Thermodynamic Steam Trap for use with 4-Bolt Pipeline Connector Description The UTDS90 is a workshop maintainable stainless steel thermodynamic steam trap with a replaceable disc and seat. It has been specifically designed to ASME Class 900. The UTDS90 is attached to a suitable pipeline connector (e.g. PC90) by four connector bolts for quick and easy installation, and replacement. Standard This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU. Certification This product is supplied with EN 10204 3.1 certification as standard. Note: All certification / inspection requirements must be specified at the time of order placement. Canadian Registration (CRN) for the UTDS90 is pending.
UTDS90 shown connected to a PC90 four bolt connector.
8.9 27
PC90 Pipeline Connector
UTDS90 Steam Trap
Pipeline connector options The UTDS90 must be fitted to a 4-Bolt pipeline connector or approved equivalent. PC90 4-Bolt Pipeline Connector
ASME 900
(TI-P806-01)
See the relevant Technical Information sheet as listed above for details of the pipeline connector.
TI-P804-01 CMGT Issue 3
Page 1 of 6
UTDS90 Stainless Steel Thermodynamic Steam Trap for use with 4-Bolt Pipeline Connector
Powered by FlippingBook