Steam traps Swivel connectors and traps
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P128-10 CMGT Issue 8
PC10HP Pipeline Connector
Description The PC10HP pipeline connector is designed for use with swivel connector steam traps up to the maximum pressure / temperature limitations of the selected steam trap. The principle is that the pipeline connector can be fitted into the pipeline, either horizontally or vertically. The steam trap can be fitted afterwards to the connector and can be rotated through 360 ° to ensure that the trap is in the horizontal plane. Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU. Certification This product is available with certification to EN 10204 3.1. Note : All certification / inspection requirements must be stated at the time of order placement. Sizes and pipe connections
Condensate inlet / outlet DN15, DN20 and DN25 ½", ¾" and 1" screwed BSP T Rp (ISO 7-1) or NPT Socket weld ends to ASME B 16.11 / BS 3799 Class 3000.
5.9.6
Flanged versions are also available upon request. Please contact Spirax Sarco for further details. The PC10HP has been designed for use with the following steam trap options:- UBP32, UTD30L, UTD30H, UTDS46M, UTD52L, UIB30, UIB45, UFT32, USM21 and USM32.
8.9 5
Steam trap type to be specified e.g. Spirax Sarco UBP, UTD, UIB, UFT, USM etc.
1
Materials No. Part
Kv values Size
Material
DN15 DN20 DN25
For conversion: Cv (UK) = Kv x 0.963 Cv (US) = Kv x 1.156
Austenitic stainless steel type 304
1
Body
ASTM A 351 CF8
Kv
1.1 1.1 1.1
TI-P128-10 CMGT Issue 8
Page 1 of 3
PC10HP Pipeline Connector
Powered by FlippingBook