Steam traps Swivel connectors and traps
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2023
TI-P128-15 CMGT Issue 5
PC20 Pipeline Connector with Integral Strainer
PC20
Blowdown valve
5.9.10
Steam trap type to be specified e.g. Spirax Sarco UBP, UTD, UIB, UFT etc.
8.9 9
Description The PC20 range of pipeline connectors are designed to give universal flow direction when used with the following swivel connector steam traps:- UTD26, UTDM42, UTD52, UBP21, UBP32, UFT14, UFT32, UIB30 and UIB30H. The integral strainer screen provides protection for the selected steam trap where system conditions require. There is an optional blowdown valve which can be used to periodically remove any pipeline debris. The PC20 can also be supplied fitted with an integral Spiratec sensor to detect steam trap failures and reduce energy costs. These are designated IPC20 and IPC21. Full details are on TI-P128-17. Standards This product fully complies with the requirements of the Pressure Equipment Directive (PED). Certification This product is available with certification to EN 10204 2.2. Note: All certification/inspection requirements must be stated at the time of order placement.
Sizes and pipe connections Condensate inlet/outlet DN15, 20 and 25 Screwed BSP, NPT Socket weld ends to ANSI B 16.11/BS 3799 Class 3000. Optional extras - Integral blowdown valve, see TI-P153-01 for further details.
- Integral Spiratec sensor, see TI-P128-17 for further details.
TI-P128-15 CMGT Issue 5
Page 1 of 4
PC20 Pipeline Connector with Integral Strainer
Powered by FlippingBook