Steam traps Swivel connectors and traps
8
K v values Size
DN15
DN20
DN25
K v
1.1
1.1
1.1
For conversion: C v (UK) = K v x 0.963 C v (US) = K v x 1.156
Dimensions/weights (approximate) in mm and kg Size A B C
C*
D
Weight
½ "
81
24
75
95
58
0.80
1.20*
¾ "
89
24
75
95
64
0.90
1.30*
1"
99
25
79
100
69
1.10
1.50*
* is for PC20 with integral blowdown valve
A
5.9.12
C
C*
D
B
8.9 11
Safety information, installation and maintenance For full details see Installation and Maintenance Instructions (IM-P128-11) supplied with the product. General information There are two criteria which must be satisfied to ensure that the swivel connector trap will operate correctly and ensure effective condensate removal: - The PC20 shall be installed with flow in the direction of the arrow. Flow can be horizontal (either direction), vertical or inclined. - The connection face for the swivel connector steam trap must always be in the vertical plane unless stated on relevant steam trap Installation and Maintenance Instructions. After installation it is recommended that the pipeline connector is insulated to minimise radiated heat losses and to protect personnel from burns risk. Note: Ensure that the discharge from the blowdown valve blows to a safe place. Detailed instructions regarding welding socket weld versions are provided with the product.
Disposal The product is recyclable. No ecological hazard is anticipated with disposal of this product providing due care is taken.
How to order Example: 1 off ½" Spirax Sarco PC20 pipeline connector with integral strainer in austenitic stainless steel socket weld to ANSI B 16.11 Class 3000.
TI-P128-15 CMGT Issue 5
Page 3 of 4
PC20 Pipeline Connector with Integral Strainer
Powered by FlippingBook