Steam traps Swivel connectors and traps
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P128-17 CMGT Issue 4
IPC20 and IPC21 Pipeline Connectors with Integral Spiratec Sensors
5.9.14
Steam trap type to be specified e.g. Spirax Sarco UBP, UTD, UIB, UFT, etc.
SS1 sensor shown
8.9 13
Description The IPC20 is a pipeline connector with integral strainer and Spiratec sensor for use with UTD52L, UTD52H, UTD26, UTD26Y, UBP21 and UBP32 steam traps. The IPC21 is a pipeline connector with an integral strainer and Spiratec sensor for use with UIB30, UIB30H, UFT14 and UFT32 steam traps. Both the IPC20 and IPC21 can be fitted with the following sensor options: SS1 sensor - for detection of steam leakage.
WLS1 sensor with diode - for use with R16C monitor to detect steam wastage and waterlogging. WLS1 sensor without diode - for use with R1C to detect steam wastage and waterlogging. Standards These products fully comply with the requirements of the Pressure Equipment Directive (PED). Certification These products are available with certification to EN 10204 2.2. Note: All certification/inspection requirements must be stated at the time of order placement. Sizes and pipe connections Condensate inlet/outlet DN15, 20 and 25 (½", ¾" and 1") Screwed BSP, NPT Socket weld ends to ANSI B 16.11/BS 3799 Class 3000.
TI-P128-17 CMGT Issue 4
Page 1 of 5
IPC20 and IPC21 Pipeline Connectors with Integral Spiratec Sensors
Powered by FlippingBook