Steam traps Swivel connectors and traps
8
Kv values Size
DN15 (½")
DN20 (¾")
DN25 (1")
Kv
1.1
1.1
1.1
For conversion: Cv (UK) = Kv x 0.963 Cv (US) = Kv x 1.156
Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions (IM-P128-11) supplied with the product. General information There are two criteria which must be satisfied to ensure that the swivel connector trap will operate correctly and ensure effective condensate removal: - The IPC20 and IPC21 must be installed in a horizontal pipeline with the sensor at the bottom. - The connection face for the swivel connector steam trap must always be in the vertical plane unless stated on relevant steam trap Installation and Maintenance Instructions. After installation it is recommended that the pipeline connector is insulated to minimise radiated heat losses and to protect personnel from burn risk. Detailed instructions regarding welding socket weld versions are provided with the product.
Disposal This product is recyclable. No ecological hazard is anticipated with disposal of this product providing due care is taken.
How to order Example: 1 off ½ " Spirax Sarco IPC21 pipeline connector with socket weld connections fitted with an integral strainer screen and SS1 Spiratec sensor for steam wastage detection.
8.9 16
TI-P128-17 CMGT Issue 4
Page 4 of 5
IPC20 and IPC21 Pipeline Connectors with Integral Spiratec Sensors
Powered by FlippingBook