Steam traps Balanced pressure
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2024
TI-P122-01 CMGT Issue 7
BPT13 Brass Balanced Pressure Thermostatic Steam Trap Description The BPT13 is a readily maintainable brass bodied, balanced pressure thermostatic steam trap. The standard trap is designated BPT13A and has angled connections. Available types BPT13A Angled connections (standard trap) BPT13AX Angled connections with strainer screen BPT13S Straight connections BPT13SX Straight connections with strainer screen BPT13UA Angled connections, union inlet BPT13UAX Angled connections, union inlet with strainer screen BPT13US Straight connections, union inlet BPT13USX Straight connections, union inlet with strainer screen Capsule fill and operation - When placing an order always state the capsule fill: Standard capsule - Is marked with 'STD' for operation at approximately 12 °C below steam saturation temperature. Optionally - The capsule can be supplied for sub-cooled 'SUB' operation at approximately 24 °C below steam saturation temperature. For critical applications the 'NTS' fill capsule should be selected which operates at approximately 4 °C below steam saturation temperature. Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU. Certification This product is available with a manufacturers' Typical Test Report. Note: All certification / inspection requirements must be stated at the time of order placement.
8.2 11
Sizes and pipe connections ", ½" and ¾" screwed BSP T Rp (ISO 7-1) or NPT.
BPT13A
BPT13UA
TI-P122-01 CMGT Issue 7
Page 1 of 4
BPT13 Brass Balanced Pressure Thermostatic Steam Trap
Powered by FlippingBook