Steam traps Swivel connectors and traps
8
Capacities
Differential pressure psi
15
29
73
145 218 290 377
550
1213
882
400
441
200
220
100
110
50
20
1
2
5
10 15
26
Differential pressure bar (x 100 = kPa)
Optional extras Insulating cover: To prevent the trap being unduly influenced by excessive heat loss such as when subjected to low outside temperatures, wind, rain etc. Integral Blowdown Valve: A blowdown valve can be fitted by replacing the strainer cap with a blowdown valve adaptor. Having a blowdown valve fitted will aid the removal of debris from the inside of the strainer screen. This should be carried out periodically depending on the cleanliness of the system.
How to order The UTD26_ is supplied in two parts:-
PC10HP
Standard connection
PC3 _ PC4 _
+ 1 integral ISO valve
1. The swivel pipeline connector
8.9 59
Note: Any optional extras need to be specified at the time of order placement.
+ 2 integral ISO valves
STS17.2 + 2 integral ISO valves 2. The UTD26_ trap complete with inner and outer gaskets and two connector screws. Items will be supplied in a protective box.
How to order example: 1 off Spirax Sarco DN20 PC10HP swivel pipeline connector with socket weld connections. 1 off Spirax Sarco UTD26LAY thermodynamic steam trap fitted with an anti-air-binding disc and integral blowdown valve. The unit is supplied complete with connector screws and gaskets. 1 off Insulating cover to fit a UTD26LAY.
TI-P154-04 CMGT Issue 3
Page 5 of 6
UTD26 and UTD26Y Stainless Steel Thermodynamic Steam Traps with Swivel Connector
Powered by FlippingBook