Steam traps Swivel connectors and traps
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P181-01 CMGT Issue 10
BTD52L and BTD52L Food+ Thermodynamic Steam Trap
Description The BTD52L is manufactured from 316L stainless steel specifically for mains drainage applications in clean steam systems. BTD52L Food+
Designed, manufactured and approved for Steam and Condensate applications. This product complies with EC1935:2004 Food Contact Materials. It also complies with regulation EC2023:2006 on good manufacturing practice for materials and articles intended to come into contact with food. A list of the materials that could come directly or indirectly into contact with foodstuffs can be found in the Declaration of Compliance available for this product. Standards These products fully comply with the requirements of the EU Pressure Equipment Directive/UK Pressure Equipment (Safety) Regulations. Certification - This product is available with certification to EN 10204 3.1. Note : All certification/inspection requirements must be stated at the time of order placement - The BTD52L Food+ is available with an EC1935:2004 Declaration of Compliance. Note : All certification/inspection requirements must be stated at the time of order placement BTD52L Food+ ½" range available with a food contact regulation Declaration of Compliance Designed, manufactured and approved for Steam and Condensate applications, the BTD52L Food+ product complies with: - (EC)1935:2004 Materials and Articles Intended to come into Contact with Food - (EC)2023:2006 Good Manufacturing Practice for Materials and Articles Intended to come into Contact with Food - (EU)10/2011 Plastic Materials and Articles Intended to come into Contact with Food - FDA Code of Federal Regulations - title 21 - Food and Drugs
Screwed
5.9.40
8.9 61
½" Tube ends
Optional extras An insulating cover is available at extra cost to prevent the trap being unduly influenced by excessive heat loss when subjected to low ambient temperature, wind and rain etc.
Sanitary clamp ends
TI-P181-01 CMGT Issue 10
Page 1 of 6
BTD52L and BTD52L Food+ Thermodynamic Steam Trap
Powered by FlippingBook