Steam traps Swivel connectors and traps
8
Capacities
Differential pressure psi (x 6.89 = kPa)
7.25 10.2 14.5
29 43.5 58 72.5 102 145
551
", ½" Screwed
441
¼" Screwed, ½" Sanitary clamp ½" O/D Tube end
220 198 176 154 132 110 88
66
Differential pressure bar (x 100 = kPa)
Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions (IM-P181-03) supplied with the product.
The trap should preferably be installed in the horizontal plane, with a small drop leg preceding it. For freeze proof installation, or where horizontal fitting is not possible, the BTD52L may be installed vertically, but the service life may be affected. Suitable isolation valves must be installed to allow for safe maintenance and trap replacement. When the trap discharges into a closed return system, a non-return valve should be fitted downstream to prevent return flow. Disposal The product is recyclable. No ecological hazard is anticipated with the disposal of this product, providing due care is taken.
5.9.42
How to order Example: 1 off Spirax Sarco BTD52L thermodynamic steam trap in 316L stainless steel with tube ends 17.2 mm O / D x 1.6 mm wall thickness (ISO 1127, Series 1).
8.9 65
TI-P181-01 CMGT Issue 10
Page 5 of 6
BTD52L and BTD52L Food+ Thermodynamic Steam Trap
Powered by FlippingBook