How to order The UIB30 is supplied in two parts: Steam traps Swivel connectors and traps
8
PC10HP
Standard connection
PC20
+ 'Y' type strainer
Note: Any optional extras need to be specified at the time of order placement.
1. The swivel pipeline connector
PC3 _ PC4 _
+ 1 integral ISO valve
+ 2 integral ISO valves
2. The UIB30 trap complete with inner and outer gaskets and two connector screws.
How to order example: 1 off ½ " PC10HP swivel connector having screwed NPT connections for use with a UIB30/4 sealed inverted bucket steam trap. 1 off UIB30/4 sealed inverted bucket steam trap complete with gaskets and connector screws. or 1 off UIB30/4 sealed inverted bucket steam trap with a ½ " NPT drain plug and connection, complete with gaskets and connector screws. Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions (IM-P113-02) supplied with the product. Installation note: The pipeline connector can be installed in either horizontal or vertical pipework. DIsposal: The UIB30 trap unit is manufactured from stainless steel and is therefore totally recyclable. No ecological hazard is anticipated with the disposal of this product provided due care is taken.
Spare parts The spare parts available are shown in heavy outline. Parts drawn in a grey line are not supplied as spares. Available spares Connector screw and gasket set How to order spares Always order spares by using the description given in the column headed 'Available spares' and state the type of trap. Example: 1 - Connector screw and gasket set for a Spirax Sarco UIB30 sealed inverted bucket steam trap.
10 , 11 , 12
8.9 72
10
12 11
Recommended tightening torques
or mm
Item Part
N m
10
Connector screws
"
33
TI-P113-01 CMGT Issue 11
Page 6 of 6
UIB30 and UIB30H Sealed Inverted Bucket Steam Traps (for use with Pipeline Connectors)
Powered by FlippingBook