Steam traps Swivel connectors and traps
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P113-03 CMGT Issue 5
UIB45 Sealed Inverted Bucket Steam Trap (for use with Pipeline Connectors)
PC10HP shown
5.9.54
Description The UIB45 is a sealed inverted bucket steam trap for either horizontal or vertical installation (with the cover hanging downwards). When installed with a suitable pipeline connector (available separately from Spirax Sarco) the UIB45 can easily and simply be removed without breaking into the pipeline, thus speeding up trap replacement with minimal system downtime. Pipeline connectors are available with screwed, socket weld and flanged end connections. Standards This product fully complies with the requirements of the EU Pressure Equipment Directive/UK Pressure Equipment (Safety) Regulations. Note: The body/cover weld joint complies with ASME section IX. Certification This product is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement. Pipeline connector options The UIB45 can be fitted to a variety of pipeline connectors including: PC10HP Straight connector ASME 600 (TI-P128-10) PC20 Straight connector with Maximum differential pressure ASME 300 (TI-P128-15) PC3 _ Straight connector with one piston isolation valve ASME 600 (TI-P128-02) PC4 _ Straight connector with two piston isolation valve ASME 600 (TI-P128-03)
8.9 89
See the relevant Technical Information sheet as listed above for details of the connections available for each pipeline connector.
TI-P113-03 CMGT Issue 5
Page 1 of 5
UIB45 Sealed Inverted Bucket Steam Trap (for use with Pipeline Connectors)
Powered by FlippingBook