Condensate pumps Mechanical pumps and pumps traps
9
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P612-28 CMGT Issue 11
APT10 and APT10SS Automatic Pump Traps
Description The Spirax Sarco APT10 and APT10SS automatic pump traps are screwed displacement receivers, pressure rated to PN10 and PN16 respectively. Both units are capable of automatically trapping or pumping, depending on line conditions. The units are operated by steam and are used to remove condensate from process and heating plant under all operating conditions, including vacuum. The shell body and cover are available in SG iron (designated APT10) and stainless steel (designated APT10SS). The APT10 is available with a standard blue paint finish or coated in ENP (Electroless Nickel Plate), while the APT10SS is available with electropolish as the standard finish. Certification This product is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement. Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU, ATEX Directive 2014/34/EU and carries the and marks when so required. Design compliance Shell designed in accordance with A.D. Merkblatter/ASME VIII.
6.1.2
9.1 1
Trap and outlet check valve mechanism
TI-P612-28 CMGT Issue 11
Page 1 of 7
APT10 and APT10SS Automatic Pump Traps
Powered by FlippingBook