Condensate pumps Mechanical pumps and pumps traps
9
Spare parts The spare parts available are shown in solid outline. Parts drawn in a grey line are not supplied as spares. Available spares (see page 7 for part number identification) A Cover gasket
2
B C D
2, 12
Inlet check valve
2, 14, 24
Spring and actuator arm
2, 5, 6, 21
Float
E
2, 7, 8, 9, 10, 22, 23
Trap and outlet check valve mechanism
F
2, 16, 17, 18, 19
Inlet / exhaust valve and seat kit
G Motive supply strainer (Fig. 12 SG iron or Fig 16L Stainless Steel) - see separate literature
27
Please note: For customer convenience, spares are supplied in kits to ensure all the appropriate replacement parts are available e.g. when an inlet /exhaust valve and seat assembly is ordered, all replacement split pins, washers and gaskets will be provided in addition to the key components listed.
How to order spares Always order spares by using the description given in the column headed 'Available spares' and state the size and type of unit. Example: 1 off Inlet /exhaust valve and seat kit for a Spirax Sarco DN20 x DN20 (¾" x ¾") APT10 automatic pump trap.
G
F
A
6.1.7
B
9.1 6
E
C
D
TI-P612-28 CMGT Issue 11
Page 6 of 7
APT10 and APT10SS Automatic Pump Traps
Powered by FlippingBook