Condensate pumps Mechanical pumps and pumps traps
9
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P612-02 CMGT Issue 15
APT14, APT14HC and APT14SHC Automatic Pump Traps
Description The Spirax Sarco APT14, APT14HC and APT14SHC automatic pump traps are flanged or screwed displacement receivers pressure rated to PN16. The units are capable of automatically trapping or pumping, depending on pipeline conditions. The unit is operated by steam (saturated or superheated) and is used to remove condensate from process plant under all operating conditions including vacuum. For optional extras see 'How to order' on page 6. Definition of Motive Steam For clarity throughout this document, it is important to note that the term ‘motive steam’ is used to describe both saturated steam and superheated steam. Design compliance The shell of the product has been designed in accordance with A.D. Merkblatter/ASME VIII. Standards These products fully comply with the requirements of the European Pressure Equipment Directive 2014/68/EU, ATEX Directive and carry the and marks when so required. Certification These products are available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement.
6.1.10
9.1 9
TI-P612-02 CMGT Issue 15
Page 1 of 13
APT14, APT14HC and APT14SHC Automatic Pump Traps
Powered by FlippingBook