Condensate pumps Mechanical pumps and pumps traps
9
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P136-02 CMGT Issue 17
MFP14, MFP14S and MFP14SS Automatic Pumps
Description The Spirax Sarco MFP14 automatic pump is a displacement receiver operated by saturated steam, superheated steam or compressed air. It is generally used to lift liquids such as condensate to a higher level. Subject to the conditions being suitable, the pump can also be used to directly drain closed vessels under vacuum or pressure. In conjunction with a float steam trap the pump can be used to effectively drain temperature controlled heat exchangers under all operating conditions. Definition of Motive Steam For clarity throughout this document, it is important to note that the term ‘motive steam’ is used to describe both saturated steam and superheated steam. Available types
9.1 23
SG iron
MFP14
Cast steel
The MFP14 is available with the following body materials:
MFP14S
Stainless steel
MFP14SS
Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU, ATEX Directive 2014/34/EU and carries the and marks when so required. Certification Note: Applicable to EU countries and UK only This product is available with certification to EN 10204 3.1. Designed in accordance with AD-Merkblatter and ASME VIII Div 1. All certification/inspection requirements must be stated at the time of order placement.
TI-P136-02 CMGT Issue 17
Page 1 of 11
MFP14, MFP14S and MFP14SS Automatic Pumps
Powered by FlippingBook