Condensate pumps Mechanical pumps and pumps traps
9
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P680-01 CMGT Issue 5
APT10-PPU, APT14-PPU and APT14HC-PPU (Closed System) Automatic Pump-trap Packaged Units
Description The Spirax Sarco APT10-PPU, APT14-PPU and APT14HC-PPU automatic pump-trap packaged units are plug in systems specifically designed to remove condensate from plant under 'stall' conditions. The whole system is capable of handling capacities up to 2 800 kg/h pumping and 9 000 kg/h trapping, depending on available differential pressure. Each unit comes with a condensate receiver, motive supply drain trap and ancillaries. Operated by steam the APT10, APT14 and APT14HC-PPU's meet a wide range of applications. The standard pump-trap is manufactured from SG iron, although electroless nickel plated (ENP) versions are available on request.
6.1.34
9.1 37
Standards These products fully comply with the requirements of the European Pressure Equipment Directive 2014/68/EU and carry the All welding is in accordance with ASME IX, BS EN 287/288, BS EN part 1-2004 and BS EN ISO 15614 part 1-2004.
mark.
Certification These products are available with a Declaration of Conformity. Other certification is available for individual component parts if required, at extra cost. Note : All certification/inspection requirements must be stated at the time of order placement.
TI-P680-01 CMGT Issue 5
Page 1 of 5
APT10-PPU, APT14-PPU and APT14HC-PPU (closed system) Automatic Pump-trap Packaged Units
Powered by FlippingBook