Pipeline ancillaries Bellows sealed stop valves
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P137-18 CMGT Issue 15
BSAT and BSA Bellows Sealed Stop Valves
Description A range of sealed, in-line stop valves having twin ply bellows as standard throughout the range. These valves have been designed for use on steam, gas, liquid, condensate and water systems. The standard BSAT range comes complete with throttling plug and locking device. The alternative BSA range has a flat disc. The Tables on page 2 and 3 clearly display the available sizes, pipeline connections and available options for the standard and alternative ranges. Standards The product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU and carries the mark when so required. Certification
The BSA1 and BSA1T is available with a manufacturer's Typical Test Report. The BSA2, BSA2T, BSA3, BSA3T, BSA6T and BSA64T is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement.
7.1.6
10.1 7
BSA6T shown
TI-P137-18 CMGT Issue 15
Page 1 of 17
BSAT and BSA Bellows Sealed Stop Valves
Powered by FlippingBook