Pipeline ancillaries Ball valves
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2026
TI-P167-30 CMGT Issue 3
M10 ECFi4 Food+ Ball Valve ¼" to 2½"
Description The M10 ECFi4 three-piece body ball valve has been designed for use as an isolating valve, not a control valve, has a lockable handle as standard and can be serviced without removal from the pipeline (screwed and welded versions only). It was designed and manufactured specially for Steam and Condensate applications. The valve complies with Regulation EC 1935/2004 on Food Contact Materials and Regulation EC 2023/2006 on Good Manufacturing Practice for food-contact materials. The product also meets the requirements of EU 10/2011 for plastic materials intended to come into contact with food.
ISO mounting The integral ISO body mounting allows the valve to be automated without losing seal integrity, as the body does not require disassembly. Manual to remote control may therefore be easily accomplished by the ISO range of Spirax Sarco ball valves. Nomenclature After the name M10 ECFi4, the nomenclature will be followed with either FB (full bore) or RB (reduced bore). Standards This product complies with the requirements of the EU Pressure Equipment Directive 2014/68/EU/UK Pressure Equipment (Safety) Regulations and carries the mark when so required.
10.3 9
TI-P167-30 CMGT Issue 3
Page 1 of 7
M10 ECFi4 Food+ Ball Valve ¼" to 2½"
Powered by FlippingBook