Pipeline ancillaries Ball valves
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P133-08 CMGT Issue 16
M10V Ball Valve DN¼" to 2½"
Description The M10V three-piece body ball valve has been designed for use as an isolating valve, not a control valve, and can be serviced without removal from the pipeline (screwed and welded versions only). It can be used with the majority of industrial fluids. Available types M10V2_ _ Zinc plated carbon steel body, PTFE seats. M10V3_ _ Stainless steel body, PTFE seats. M10V4_ _ Complete stainless steel, PTFE seats.
10.3 17
Note: The nomenclature will be followed with either FB (full bore) or RB (reduced bore).
Standards This product fully complies with the requirements of the Pressure Equipment Directive (PED) and carries the
mark when so
required.
Certification This product is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement.
TI-P133-08 CMGT Issue 16
Page 1 of 8
M10V Ball Valve DN¼" to 2½"
Powered by FlippingBook