Pipeline ancillaries Ball valves
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2018
TI-P133-60 CMGT Issue 9
M10Vi ISO Ball Valve DN¼" to DN2½"
Description The M10Vi ISO three-piece body ball valve has been designed for use as an isolating valve, not a control valve, has a lockable handle as standard and can be serviced without removal from the pipeline (screwed and welded versions only). It can be used with process fluids for services ranging from vacuum to the higher temperatures and pressures. ISO mounting The integral ISO body mounting allows the valve to be automated without losing seal integrity, as the body does not require disassembly. Manual to remote control may therefore be easily accomplished by the ISO range of Spirax Sarco ball valves. Available types M10Vi2_ _ ISO Zinc plated carbon steel body, PTFE seats. M10Vi3_ _ ISO Stainless steel body, PTFE seats. M10Vi4_ _ ISO Complete stainless steel, PTFE seats.
7.3.18
Note: The nomenclature will be followed with either FB (full bore) or RB (reduced bore). Standards This product fully complies with the requirements of the Pressure Equipment Directive (PED) and carries the required. Certification This product is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement.
mark when so
10.3 33
Sizes and pipe connections Full bore Screwed and welded ¼", 3/8 ", ½", ¾", 1", 1¼", 1½" and 2" BSP, BSPT, API/NPT, BW, SW Reduced bore Screwed and welded ¼", 3/8 ", ½", ¾", 1", 1¼", 1½", 2" and 2½" BSP, BSPT, API/NPT, BW, SW
Flanged DN15 to DN50 ASME Class 150, ASME Class 300,and EN 1092 PN40.
Flanged DN15 to DN65 ASME Class 150, ASME Class 300, and EN 1092 PN40.
Page 1 of 7
Powered by FlippingBook