Pipeline ancillaries Ball valves
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2018
TI-P133-31 CMGT Issue 10
M31V ISO Full Bore Ball Valve DN50 to DN200 DIN PN16 (F1 and F4)
Description The M31V ISO full bore two-piece body ball valve, has been designed for use as an isolating valve, not a control valve. It can be used with the majority of industrial fluids on applications, which include steam, condensate, water, oil and other fluids within its operating range. It is not recommended for gases applications. The M31V ISO DIN has antistatic seats as standard and an ISO mounting pad in accordance with ISO 5211.
DN50 shown
7.3.124
Available types M31V2 ISO
Zinc plated carbon steel body, PTFE seats and ISO mounting.
M31V3 ISO
Stainless steel body, PTFE seats and ISO mounting.
Standards This product fully complies with the requirements of the Pressure Equipment Directive (PED) and carries the
mark when so
required.
10.3 111
Certification This product is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement. Options - Self-venting ball. - Operation by manual handwheel for bigger sizes (DN100 to 200). - Operation by pneumatic actuator BVA200 series for all sizes. - Other ball materials are available on request (i.e: 11-13% Cr). Sizes and pipe connections DN50, DN65, DN80, DN100, DN150 and DN200. Standard flange EN 1092 PN16 with face-to-face dimensions according to DIN 3202 F1 and F4/F5.
Page 1 of 6
Page 1 of 4
Powered by FlippingBook