Control systems Electric actuators
4
Safety information, installation and maintenance Full details for the safe installation, commissioning and removal of the AEL7 Series actuator can be found in: IM-P713-01 for AEL7 versions and IM-P713-02 for AEL7T versions
Installation and wiring note The valve should be installed in the horizontal line. The position of the actuator will depend on the type of valve to which it is fitted and the temperature of the media. However, it is not recommended that the actuators be fitted directly below the valve or in a wet environment.
Disposal This product is recyclable. No ecological hazard is anticipated with the disposal of this product, providing due care is taken.
Selection example
Control Valve
DN20 JE43 HTSUSS Kv10
Kvs
6.3
Connection
PN63
Operating ΔP
30 bar
Electrical Supply
24 Vdc
4.3 53
Control Input Signal
4-20mA
Position Feedback
4-20mA
End-position Feedback
VFC
Information Source
Maximum ΔP
103.4 bar
Differential Pressure Tables (Class IV) Metal Seated (T & S)
Mounting Flange
EL5971J
AEL7 Valve Adapter and Mounting Flange Selection - Spira-trol™ J
Stem Adapter
AEL7XJ01
AEL7X224 (Supplied with actuator)
Positioner
Nomenclature and How to Order
Position Feedback
Positioner function
AEL7 Technical Specification
End-position Feedback
AEL7X014
AEL7 Assessories (Positioner)
TI-P713-02 CTLS Issue 8
Page 29 of 30
AEL7 Series Electric Linear Actuator
Powered by FlippingBook