Pipeline ancillaries Strainers and filters
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P064-02 CMGT Issue 15
Fig 34 Carbon Steel Strainer - ASTM Material
Description The Fig 34 is an integrally flanged Y-type strainer designed to remove rust, scale and other debris from the pipeline. It is produced from carbon steel, ASTM material. The standard stainless steel screen in the DN15 to DN80 (½" to 3") is 0.8 mm perforations and in the DN100 to DN200 (4" to 8") it is 1.6 mm perforations. Note: A low temperature carbon steel strainer is available on request. Standards This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU. Certification The product is available with a manufacturer's Typical Test Report as standard and certification to EN 10204 3.1 for body and cap by order. Note: All certification/inspection requirements must be stated at the time of order placement.
DN15 to DN25 (½" to 1")
7.6.36
DN32 to DN50 (1¼" to 2")
10.6 47
DN65 to DN200 (2½" to 8")
TI-P064-02 CMGT Issue 15
Page 1 of 7
Fig 34 Carbon Steel Strainer - ASTM Material
Powered by FlippingBook