Pipeline ancillaries Strainers and filters
10
Pressure / temperature limits
Pressure psi g
0
290
580
870 1160
1480
A B
797
752 572 392 212 32 -20.2
Steam saturation curve
D
C
E
Pressure bar g
The product must not be used in this region.
A - C Flanged ASME (ANSI) B16.5 Class 600, ASME (ANSI) 600 RTJ, Screwed NPT, Socket weld ASME (ANSI) B16.11 Class 3000 and Butt weld ASME (ANSI) B16.25 Schedule 40 and 80. B - D Flanged EN 1092 PN100 and Screwed BSP T Rp (ISO 7-1). B - E Flanged EN 1092 PN63.
A - C Flanged ASME 600 and 600 RTJ Screwed NPT Socket weld and Butt weld
B - D Flanged EN 1092 PN100 and Screwed BSP
B - E Flanged EN 1092 PN63
Body design conditions
ASME 600
PN100
PN63
102.1 bar g @ 38 ° C (1481 psi g @ 100 °F) 425 ° C@ 57.5 bar g (797 °F @ 834 psi g)
100 bar g @ 50 ° C (1450 psi g @ 122 °F) 400 ° C@ 59.5 bar g (752 °F @ 863 psi g)
63 bar g @ 50 ° C (914 psi g @ 122 °F) 400 ° C@ 37.5 bar g (752 °F @ 544 psi g)
PMA Maximum allowable pressure
TMA Maximum allowable temperature
-29 ° C (-20.2 °F)
-29 ° C (-20.2 °F)
-29 ° C (-20.2 °F)
Minimum allowable temperature
102.1 bar g @ 38 ° C (1481 psi g @ 100 °F) 425 ° C@ 57.5 bar g (797 °F @ 834 psi g)
100 bar g @ 50 ° C (1450 psi g @ 122 °F) 400 ° C@ 59.5 bar g (752 °F @ 863 psi g)
63 bar g @ 50 ° C (914 psi g @ 122 °F) 400 ° C@ 37.5 bar g (752 °F @ 544 psi g)
PMO Maximum operating pressure
TMO Maximum operating temperature
10.6 64
-29 ° C (-20.2 °F)
-29 ° C (-20.2 °F)
-29 ° C (-20.2 °F)
Minimum operating temperature Note: For lower operating temperatures consult Spirax Sarco.
Product is safe for use under full vacuum conditions
153 bar g (2219 psi g)
150 bar g (2176 psi g)
95 bar g (1378 psi g)
Designed for a maximum cold hydraulic test pressure of:
TI-P168-01 CMGT Issue 4
Page 4 of 6
Fig 34HP Carbon Steel Strainer
Powered by FlippingBook