Pipeline ancillaries Separators and insulation jackets
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P023-26 CMGT Issue 13
S13 SG Iron Separator (Flanged)
2
3
1
Description The S13 separator is an SG iron baffle type separator used for the removal of entrained liquids in steam, compressed air or gas systems. The fitting of insulation jackets will increase the performance of the separator. Standards This product fully complies with the requirements of the EU Pressure Equipment Directive / UK Pressure Equipment (Safety) Regulations and is designed in accordance with ASME B31.3. Certification This product is available with a manufacturers' Typical Test Report. Note: All certification/inspection requirements must be stated at the time of order placement. Sizes and pipe connections DN40, DN50, DN65, DN80, DN100, DN125, DN150 and DN200 (1½", 2", 2½", 3", 4", 5", 6", and 8"). Flanged EN 1092 PN16 and PN25 with screwed BSP drain. Flanged JIS/KS 10K with screwed BSP drain. Flanged JIS/KS 20K with screwed BSP drain - DN40, DN50, DN65 and DN200 only. Flanged ASME125/150 with screwed NPT drain Materials No. Part Material 1 Body SG iron BS EN 1563/EN-JS1030/A395 2 Plug Carbon steel 1.0460 (C22.8)/A105N 3 Gasket Reinforced exfoliated graphite 4 Drain reducing bush Forged carbon steel ASTM A105 4
7.7.20
10.7 17
TI-P023-26 CMGT Issue 13
Page 1 of 4
S13 SG Iron Separator (Flanged)
Powered by FlippingBook