Pipeline ancillaries Separators and insulation jackets
10
Pressure/temperature limits
Pressure psi g
B
C
F
D E
A
Steam saturation curve
A
C
B
F
D E
Pressure bar g
The product must not be used in this region. A - A Flanged JIS/KS 10K. B - B Flanged ASME Class 150. C - C Flanged EN 1092 PN16. D - D Flanged JIS/KS 20K. E - E Flanged EN 1092 PN40. F - F Screwed BSP, NPT, socket weld and butt weld.
Body design conditions
PN50 or ASME 300
PMA Maximum allowable pressure
50 bar g @ 50 °C
725 psi g @ 122 °F
TMA Maximum allowable temperature
425 °C @ 28 bar g
797 °F @ 406 psi g
Minimum allowable temperature
-10 °C
14 °F
JIS/KS 10K
12.5 bar g
181 psi g
PN16
13.8 bar g
200 psi g
7.7.29
ASME 150
15.0 bar g
218 psi g
JIS/KS 20K
30.0 bar g
435 psi g
PMO Maximum operating pressure for saturated steam service
PN40
35.9 bar g
521 psi g
ASME 300
41.4 bar g
600 psi g
Scrd/SW/BW
41.4 bar g
600 psi g
TMO Maximum operating temperature
425 °C @ 28 bar g
797 °F @ 406 psi g
Minimum operating temperature Note: For lower operating temperatures consult Spirax Sarco.
-10 °C
14 °F
10.7 24
JIS/KS 10K
20.6 bar g
299 psi g
PN16
24.0 bar g
348 psi g
ASME 150
30.0 bar g
435 psi g
JIS/KS 20K
50.0 bar g
725 psi g
Designed for a maximum cold hydraulic test pressure of:
PN40
60.0 bar g
870 psi g
ASME 300
76.6 bar g
1 111 psi g
Scrd/SW/BW 1 111 psi g Note: Flanged separators (S5) may be supplied with a lower pressure rating than that cast into the body. Reference should be made to the appropriate operating chart to determine the actual product limitations. 76.6 bar g
TI-P023-11 CMGT Issue 16
Page 2 of 4
S5 Carbon Steel Separator
Powered by FlippingBook