Pipeline ancillaries Separators and insulation jackets
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2025
TI-P023-11 CMGT Issue 16
S5 Carbon Steel Separator
Description The S5 is a carbon steel baffle type separator used for the removal of entrained liquids in steam, compressed air and gas systems. Optional extras Insulation jackets are available which will increase the performance of the separator, (see TI-P138-01). Standards This product fully complies with the requirements of the EU Pressure Equipment Directive/UK Pressure Equipment (Safety) Regulations and carries the / mark when so required. Certification
This product is available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement.
5
4
1
Sizes and pipe connections ½ ", ¾ ", 1", 1 ¼ ", 1 ½ " and 2" Screwed BSP or NPT, butt weld, socket weld. DN15, DN20, DN25, DN32, DN40 and DN50. Flanged EN 1092 PN40 with screwed BSP drain and air vent. Flanged BS 1560 (ASME) Class 150 or 300 with screwed NPT drain and air vent. Flanged JIS/KS 10K and 20K with screwed BSP drain and air vent. Note: For larger sizes use an S7 separator. See TI-P138-03.
2
7.7.28
Flanged S5 shown
10.7 23
3 4
Materials No. Part
Material
1 2 3 4 5
Body
Carbon steel
1.0619 +N /ASTM A216 WCB
Flange
Carbon steel
DIN 17243 C22.8/ASTM A105N
Cap
Carbon steel
1.0460
Cap gasket
Tanged graphite
Cap
Carbon steel
1.0460
TI-P023-11 CMGT Issue 16
Page 1 of 4
S5 Carbon Steel Separator
Powered by FlippingBook