Pipeline ancillaries Separators and insulation jackets
10
Safety information Before placing or removing the insulation jacket, check if the separator is in service. If it is, the metal surface will be hot enough to burn and suitable protective clothing (e.g. gloves) should be worn. Handling When the jacket is new, the insulation material is fully enclosed within the inner and outer face and retained by the stitching. In this condition, for handling, no special protective clothing is required. However, if the inner and outer face become unstitched or damaged so as to expose the insulation material, suitable protective clothing (e.g. gloves, safety glasses, face mask and overalls) should be worn.
Disposal This product is not recyclable and is non-combustible. For disposal purposes consider the product to be mineral fibre and dispose of in accordance with local regulations.
7.7.47
10.7 48
0239050/7
TI-P138-01 CMGT Issue 7
Page 4 of 4
IJ-S5, IJ-S6, IJ-S5-H and IJ-S6-H Insulation Jackets for S5 and S6 Separators
Powered by FlippingBook