Pipeline ancillaries Separators and insulation jackets
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2026
TI-P023-59 CMGT Issue 7
CS10-1 Stainless Steel Clean Steam Separator
Description The CS10-1 clean steam separator has been designed in full accordance with the ASME BPE guide to overcome the issues of removing entrained moisture from clean and pure steam systems. It has also been designed with the feature of a removable baffle plate, allowing the unit to be fully inspected prior to installation and to facilitate system internal inspection. Standard surface finish Internal 0.5 µm (20 µin) Ra maximum/SF5 - as outlined in ASME BPE, with all welds ground and electropolished. External 1.6 µm (63 µin) Ra maximum, with a satin bead blast finish. Standards This product has been designed in accordance with the ASME BPE guide. It also complies with the requirements of the EU Pressure Equipment Directive/UK Pressure Equipment (Safety) Regulations. All polymers used comply with FDA regulation CFR 21 part 177 section 2600. ½", ¾" and 1" sizes are available with USP class VI. Certification This product is available with the following certification: - EN 10204 3.1 material certifications. - Certificates of conformities. - Passivation certificates. - Welding certificates. - Internal surface finish certificate. Note: All certification/inspection requirements must be stated at the time of order placement. Packaging
7.7.54
Packaging for this product is conducted in a clean environment, segregated from other non stainless steel products, and in accordance with ASME BPE for optimum protection and cleanliness; Connections of the product are fitted with protective caps before being sealed in a plastic bag.
10.7 55
TI-P023-59 CMGT Issue 7
Page 1 of 7
CS10-1 Stainless Steel Clean Steam Separator
Powered by FlippingBook