Steam traps Thermodynamic
8
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2020
TI-P151-02 CMGT Issue 5
TD16 Thermodynamic Steam Trap
Description The TD16 thermodynamic steam trap is specifically designed for low capacity condensate loads associated with steam mains drainage and tracing applications up to 16 bar g. Its all stainless steel construction makes it corrosion resistant and very robust. Standards This product fully complies with the requirements of the Pressure Equipment Directive (PED) 2014/68/EU. Certification This product is available with material certification to EN 10204 2.2. Note: All certification / inspection requirements must be stated at the time of order placement. Sizes and pipe connections ½", ¾" and 1" screwed BSP (BS 21 parallel) or NPT.
2 3
Optional extras Insulating cover: to prevent the trap being unduly influenced by excessive heat loss such as when subjected to low outside temperatures, wind, rain, etc. Integral blowdown valve: to remove debris from the strainer, see TI-P153-01 for further details.
1
Materials No. Part
8.7 3
Material
4
1 2 3 4 5 6
Body
Stainless steel
ASTM A743 Gr. CA 40
Cap
Stainless steel
AISI 416
Disc
Stainless steel
Strainer screen
Stainless steel
5 6
Strainer cap
Stainless steel
AISI 416
Strainer cap gasket
Stainless steel
Insulating cover (optional extra)
7
Aluminium
Page 1 of 4
Powered by FlippingBook