Pipeline ancillaries Separators and insulation jackets
10
Handling When the jacket is new, the insulation material is fully enclosed within the inner and outer face and retained by the stitching. In this condition, for handling, no special protective clothing is required. However, if the inner and outer face become unstitched or damaged so as to expose the insulation material, suitable protective clothing (e.g. gloves, safety glasses, face mask and overalls) should be worn. Disposal This product is not recyclable and is non-combustible. For disposal purposes consider the product to be mineral fibre and dispose of in accordance with local regulations. Dimensions/mass (approximate) in mm and kg Size A B Insulation thickness Mass DN15 190 350 50 0.57 DN20 210 390 50 0.78 DN25 275 515 50 1.20
The diagram below shows the dimensions of the jacket
A
B
7.7.3
How to order Example: 1 off IJ-S1 insulation jacket to fit a DN25 S1 separator.
10.7 6
TI-P023-49 CMGT Issue 3
IJ-S1 Insulation Jacket for S1 Separators
Powered by FlippingBook