Pipeline ancillaries Separators and insulation jackets
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2018
TI-P023-07 CMGT Issue 7
S2 Cast Iron Separator (Screwed)
2
3
1
7.7.6
Description The S2 separator is a cast iron baffle type separator used for the removal of entrained liquids in steam, compressed air or gas systems. The fitting of insulation jackets will increase the performance of the separator. Standards This product fully complies with the requirements of the Pressure Equipment Directive (PED). Certification This product is available with a manufacturers' Typical Test Report. Note: All certification/inspection requirements must be stated at the time of order placement.
4
10.7 7
Sizes and pipe connections 1¼", 1½" and 2" screwed BSP or NPT. Materials No. Part Material 1 Body Cast iron
ASTM A126 CI B
2 3 4
Plug (2" only)
SG iron
DIN 1693 GGG 40
Gasket (2" only)
Reinforced exfoliated graphite
Drain reducing bush Steel
ASTM A105
Page 1 of 3
Powered by FlippingBook