Pipeline ancillaries Separators and insulation jackets
10
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2024
TI-P750-01 CMGT Issue 1
S8F Austenitic Stainless Steel Separator Food + Description The S8F is an austenitic stainless steel (304L) baffle type separator used for the removal of entrained liquids in steam. Optional extras Insulation jackets are available which will increase the performance of the separator, (see TI-P138-01). Standards This product fully complies with the requirements of the EU Pressure Equipment Directive and carries the mark when so required. Certification These products are available with a Typical Test Report. The products are also available with certification to EN 10204 3.1. Note : All certification/inspection requirements must be stated at the time of order placement. Food+ can be supplied with material Certification for all wetted parts at extra cost. Note : All certification/inspection requirements must be stated at the time of order placement S8F Food+ DN15 to 100 range available with a food contact regulation Declaration of Compliance Designed, manufactured, and approved for Steam and Condensate applications, the S8F range Food+ product complies with: - (EC)1935:2004 Materials and Articles Intended to come into Contact with Food - (EC)2023:2006 Good Manufacturing Practice for Materials and Articles Intended to come into Contact with Food - (EU)10/2011 Plastic Materials and Articles Intended to come into Contact with Food - FDA Code of Federal Regulations - title 21 - Food and Drugs
7.7.44
This product is intended to be connected into a system that can operate a food contact compliant process. A list of the materials that could come directly or indirectly into contact with foodstuffs can be found in the Declaration of Compliance available for this product.
10.7 41
Sizes and pipe connections DN15 to DN100. Flanged EN 1092 PN16 with screwed BSP drain and air vent.
TI-P750-01 CMGT Issue 1
Page 1 of 3
S8F Austenitic Stainless Steel Separator Food +
Powered by FlippingBook